Pro AV Catalog

< Back to Previous Page

Home : Intercom & IFB Systems : Clear-Com - FreeSpeak Edge Base Station

All Products

FSE-BASE

Model: FreeSpeak Edge Base Station

IP Connectivity
Increased Capability and Flexibility
Best Audio Quality
Supports up to 6 IPT or FSE transceivers and up to 10 E1 transceivers (1.9 or 2.4GHz)
Supports up to 100 channels

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

FSE-BASE
The FreeSpeak Edge base station is a standalone 1RU device that provides extensive connectivity to a wide range of Clear-Com endpoints along with third-party Dante devices. Built primarily to deploy 5 GHz transceivers and beltpacks, the base station also provides support to FreeSpeak II splitters, 1.9 GHz E1 and IP transceivers/beltpacks*, and 2.4 GHz E1 transceivers/beltpacks.

IP Connectivity
Increased Capability and Flexibility
Best Audio Quality
Supports up to 6 IPT or FSE transceivers and up to 10 E1 transceivers (1.9 or 2.4GHz)
Supports up to 100 channels
Standard 1 rack unit (RU) device
High quality 12kHz audio to FS Edge beltpacks
2 large full-color touch screen TFT displays
4 rotary encoders for gain and menu operation
Headset connection
Stage Announce and Prog. Audio cable included
Functions as PTP Leader Clock
Wireless 5GHz Edge transceivers and beltpacks
Wireless 1.9GHz and 2.4GHz FSII splitters, transceivers and beltpacks
Dante enabled audio devices
AES67 devices via Dante controller
4-wire ports (8 ports RJ45)
2-wire ports (4 XLR-3F)
GPIO (D-type 9 pin)
LAN – 2 x RJ45, 2 x SFP
CCM browser-based configuration tool
Direct management with encoders and display

Operating Temperature (Maximum): 113 F
Operating Temperature (Minimum): 32 F
Height: 1.72 in
Length: 13.93 in
Width: 19 in
Product Weight: 7.25 lbs
AC Voltage (Maximum): 240 Volts
AC Voltage (Minimum): 100 Volts
Active Power: 160 Watt
DC Voltage: 12 Volts
Capacity: Beltpacks per Base Station 16 BPs (FSII or FSE)
Capacity: Transceivers/Antennas Supported by Base 6 x IPT or FSE TCVR and 10 x E1 TCVRs (1.9 or 2.4G
Headset Microphone Input: Input Type Dynamic /Electret – Selectable
Headset Microphone Input: Frequency Response Headset Mic – Partyline: 200Hz – 12kHz + 3dBu
Headset Microphone Input: Frequency Response Headset Mic – Line Out: 200Hz – 20kHz + 3dBu
Headset Microphone Input: Mic Limiter Threshold -50dBu ±3dB
Headset Microphone Input: Input Level -60dBu nominal; -25dBu MAX
Headset Microphone Input: Headset Mic Voltage 5V (Electret selectable)
Headset Output: Max Output Level before Distortion > 13dBu
Headset Output: Total Harmonic Distortion (THD) < 0.1% THD at 1kHz
Headset Output: Headset Mic – Partyline -78dBu (Clear-Com mode)
Headset Output: Headset Mic – Line Out -60dBu
Headset Output: Frequency Response Partyline – Headset Out: 200Hz – 10kHz + 3dBu
Audio/Radio: 4-wire Operating Levels 0dBu Nominal, 18dBu headroom
Audio/Radio: 2-wire I/O Selectable RTS or Clear-Com mode, Software control
Partyline I/O: 2W Power On/Off A/B, C/D paired- software controlled
Partyline I/O: 2W Output Voltage 25 – 28V DC, 560 mA per pair (A/B or C/D)
Partyline I/O: 2W Frequency Response 200 to 12kHz. ±3dB
Partyline I/O: 2W Total Harmonic Distortion (THD) < 0.1% THD at 1 kHz
Relay Contacts or GPIO: Connector Type 2 x DB9
Relay Contacts or GPIO: Relay Contact Type SPDT
Relay Contacts or GPIO: Relay Quantity 4
Relay Contacts or GPIO: Relay Contact Voltage Rating 30V DC
Relay Contacts or GPIO: Relay Contact Current Rating 1A
Relay Contacts or GPIO: Input Type Opto-Isolated
Relay Contacts or GPIO: Input Quantity 2
Relay Contacts or GPIO: Input Voltage Range 4 – 30 volts DC or AC
Relay Contacts or GPIO: Input Current >=1.2mA required

FreeSpeak Edge Base Station Product Info 574435 kb - Other

We bring over 25+ years of Experience to the table in Broadcast, Production and Audio Visual equipment to Broadcast, Production, Government, Corporate, Industrial, Education, and Non-profit organizations