Pro AV Catalog

< Back to Previous Page

Home : Signal Processing Systems : Datapath Ltd. - VisionRGB-E1S

All Products

Single Channel RGB/DVI/HD Capture Card

Model: VisionRGB-E1S

Single channel RGB/DVI/HD video capture card
Four Lane PCI Express interface with a maximum data rate of 650MB/sec
Maximum analog RGB video capture resolution of 2048 x 1536 x 24bit
Maximum DVI capture resolution of 1920 x 1200 x 24bit
HD modes using the supplied DVI/ Component Adapter or DVI/HDMI Adapter (HDCP not supported)

View Manufacturers Website

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The VisionRGB-E1S has a single video capture device supporting up to 1920x1080 DVI or 2048x1536 Analog resolution.

The VisionRGB-E1S captures the Analog/ DVI data and triple buffers it into onboard storage. This data is then copied using DMA to the host system for display, storage or streaming.

When a Datapath graphics card is used, the VisionRGB-E1S transfers the data directly to the graphics card thereby increasing performance. The VisionRGB-E1S capture card sends the relevant portions of each captured image to each display channel and instructs each channel to use its graphics engine to render the data. This fully utilises the hardware and dramatically increases performance.

When the RGB/DVI data is displayed on a non Datapath graphics card, the VisionRGB-E1S sends the data to system memory or direct to the graphics card, dependant on the software used for display.

Single channel RGB/DVI/HD video capture card
Four Lane PCI Express interface with a maximum data rate of 650MB/sec
Maximum analog RGB video capture resolution of 2048 x 1536 x 24bit
Maximum DVI capture resolution of 1920 x 1200 x 24bit
HD modes using the supplied DVI/ Component Adapter or DVI/HDMI Adapter (HDCP not supported)
On card processor for real time mode and sync detection
Support for multiple capture cards allowing up to 32 capture channels. (32 cards)
Direct DMA driver software and streaming driver
High quality down scaling
Support for YUV 4:2:2, RGB 5:5:5, 5:6:5 and 8:8:8 video formats
High performance DMA to system memory or direct to graphics memory with scatter gather
Support for separate H/V sync, Composite sync or Sync on Green 16 cropping windows per capture channel
Includes WDM streaming drivers and the Datapath Vision application software
Fully integrated with the Datapath Wall Control-red software for video wall applications
VisionRGB-E1S is also optimised for operation with the Datapath range of graphics cards
Support for Windows® XP/ Vista/ Server 2003/Server 2008/ Windows® 7/ Windows® 8
Datapath SDK included for software developers
Applications include:
- Dataton WatchOut
- Microsoft Expression Encoder
- Microsoft Windows® Media Encoder
- VideoLAN VLC
- NorPix StreamPix
- VitualDub
- Adobe Flash Encoder
- VidBlaster
- AMCap and other DirectShow compatible software

Input/Output Board/Card Type - Video
Spec Sheet available - Yes

Warranty (Length/Type): 3 Years
DC Voltage: 12 Volts
Active Power: 6.80 Watt
Current Draw: 0.50 Amps
Height: 2.71 in
Width: 6.60 in
Operating Temperature (Maximum): 95 F
Operating Temperature (Minimum): 32 F

Single Channel RGB/DVI/HD Capture Card 610 kb - Data Sheet

We bring over 25+ years of Experience to the table in Broadcast, Production and Audio Visual equipment to Broadcast, Production, Government, Corporate, Industrial, Education, and Non-profit organizations